HP blade bc1000 manual Technical Specifications

QuickSpecs

HP bc1000 blade PC

Technical Specifications

Broadcom 5705F 10/100 Network interface		10Base-T/100Base-TX
Integrated NIC	Compatibility	IEEE 802.3/802.3u compliant
	Data transfer method	32-bit bus-master PCI
	Features	NIC 1 WOL enabled and PXE compliant
	Network transfer rate	10Base-T (half-duplex)	10 Mb/s
		10Base-T (full-duplex)	20 Mb/s
		100Base-TX (half-duplex)	100 Mb/s
		100Base-TX (full-duplex)	200 Mb/s
	Connector	Mates into enclosure center wall assembly
	Cable support	10Base-T	Categories 3, 5, or 6 UTP; up to 328 ft (100 m)
		100Base-TX	Category 5 or 6 UTP; up to 328 ft (100 m)
Enclosure	Dimensions	Height (3U)	5.25 in (13.34 cm)
		Width	19 in (48.26 cm)
		Depth	27 in (68.58 cm)
	Weight (with interconnect	No blade PCs	59 lb (26.76 kg)
	tray)	20 blade PCs	103 lb (46.7 kg)
	Rated input (autosensing)	Voltage	Minimum: 90 VAC
			Maximum: 264 VAC
			Nominal: 100 to 120 VAC or 200 to 240 VAC
		Frequency	47 to 63 Hz
		Current	11.7 A at 90 VAC
			8.5 A at 120 VAC
			4.3 A at 240 VAC
		Power	1000 W
	BTUs	Per hour	3416
	Temperature1	Operating	50° to 95° F (10° to 35° C)
		Shipping, 72 hours	-40° to 140° F (-40° to 60° C)
	Relative humidity	Operating	10% to 90%
	(noncondensing)	Non-operating	10% to 95%
	Management	Enclosure self recovery
		Health logs
		Redundant power supply utility
		Automatic System Recovery (ASR)
	High availability	Redundant hot-plug power supplies
		Redundant hot-plug fans

NOTE 1: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Storage maximum humidity of 95% is based on a maximum temperature of 112° F (45° C). Minimum pressure for storage is 70 KPa.

DA - 11903 North America — Version 5 — May 20, 2005 Page 15