HP blade bc1000 GbE Interconnect General, Switch, Performance, Forwarding mode, MAC addresses

100 to 127 VAC (200 to 240 VAC)

47 to 63 Hz

8.5 A at 120 VAC (4.3 A at 240 VAC) 1000 W

1167 W

5.01 V - 0.5 A ~ 34 A

3.33 V - 0.5 A ~ 36 A

12.1 V - 0.5 A ~ 38 A

5 Vaux - 0.2 A ~ 8 A

600 W

700 W for 2 minutes

5° to 55° F (10° to 35° C)

-40° to 85° F (-40° to 60° C)

10% to 90%

10% to 95%

2000 VAC minimum

1500 VAC minimum

NOTE 1: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Storage maximum humidity of 95% is based on a maximum temperature of 112° F (45° C). Minimum pressure for storage is 70 KPa.

Dieletric voltage withstand

Relative humidity1 (noncondensing)

Temperature1

Power RMS Maximum peak power Operating Non-operating, shipping Operating Non-operating

Input to output Input to ground

Rated output

Voltage (autosensing)

Frequency Current Power

Maximum peak power Voltage/current

Weight Rated input

Depth

Width

6.5 lb (2.95 kg)

Enclosure Hot-Plug Power Dimensions Supply

Height

3.579 in (9.14 cm)

10.24 in (28.45 cm)

4.47 in (11.43 cm)

QuickSpecs

Technical Specifications

HP bc1000 blade PC

C-GbE Interconnect	General	Two 24-port Managed Layer 2 Ethernet switches for network cable
Switch		reduction; fully pre-configured for immediate operation
	Performance	4.0 Gbps Switching bandwidth
		12 million pps aggregate throughput (64-byte packets)
		Full-wire speed for all connections
	Forwarding mode	Store and forward
	MAC addresses	16,382; MAC address based filtering and MAC address packet priority
		configuring
	Memory	64 MB Main
		12 MB Flash
		32 MB Packet Buffer

DA - 11903 North America — Version 5 — May 20, 2005 Page 16