4Using the headphones with the audio line-in cable

To use the headphones with the audio line-in cable, follow these steps:

1.Make sure that the Bluetooth switch and the noise cancellation switch are in the off position, with no red indicator visible at the open end of the switch.

2.Plug one end of the audio line-in cable into the audio-out (headphone) jack on the left ear cup.

3.Plug the other end of the audio line-in cable into the audio-out (headphone) jack on your audio device, such as a computer, mobile phone, or MP3 player.

4.Open your media player software, if necessary. You can begin listening to music or watching a video.

ENWW

11

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Page 15
Image 15
HP Bluetooth Active Noise Cancellation Stereo Headphones manual Using the headphones with the audio line-in cable