Expanding the OmniBook
Installing a RAM Expansion Module
Installing a RAM Expansion Module
|
| The OmniBook has no memory (RAM) built in but has two slots for installing RAM |
|
| modules. One slot contains a RAM module installed at the factory. You can use both |
|
| slots to expand your RAM. |
|
|
|
|
| To install a RAM expansion module |
|
| You’ll need a small Phillips screwdriver for these steps. |
|
|
|
CAUTION | Your OmniBook’s computer chips are extremely | |
|
| can permanently damage computer chips. Handle the RAM module only by its |
|
| edges. Before installing the memory module, discharge your body’s static |
|
| electricity by touching the metal shielding around the connectors on the rear of the |
|
| OmniBook. |
|
| For a model with “4150 B” after the serial number, you must use only |
|
| RAM |
|
| 1. From the Start menu, shut down the OmniBook. |
|
| |
|
| 2. Important. Unplug the ac adapter, if present, and remove the battery. (Remove a |
|
| second battery if one is installed.) |
|
| 3. Turn the unit bottom side up, then remove the two screws from the RAM cover and |
|
| remove the cover. |
User’s Handbook | 59 |