To scan to a computer
1.Load your original print side down on the right front corner of the glass.
NOTE: Ensure that there are no memory cards inserted in the memory card slots on the product.
2.Press the button next to Scan. The Scan Menu appears.
3.Press the button next to Scan to PC.
A preview image of the scan appears on your computer, where you can edit it. Any edits that you make apply to the current scan session only.
The HP Photosmart Software has many tools that you can use to edit your scanned image. You can improve the overall image quality by adjusting the brightness, sharpness, color tone, and saturation. You can also crop, straighten, rotate, or resize the image.
4.Make any edits to the preview image, and then click Accept when you are finished.
Make a copy
You can make quality copies from the control panel.
To make a copy from the control panel
1.Load paper in the paper tray.
2.Load your original print side down on the right front corner of the glass.
3.Press the button next to Copy.
4.Press the button next to Black Copy or Color Copy.
5.Press the button next to Copies to increase the number of copies.
6.Press OK.
TIP: To make copies of thick originals, such as books, you can remove the lid.
HP Photosmart overview
Replace the print cartridges
Follow these instructions to replace print cartridges. Following these instructions might also help solve print quality issues related to the cartridges.
NOTE: When the ink level for the print cartridge is low, a message appears on your computer screen. You can also check the ink levels by using the software installed with the HP Photosmart.
When you receive a
To order print cartridges for the HP Photosmart, go to www.hp.com/buy/supplies. If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page.
Replace the print cartridges | 9 |