Using the Zoom Function

Your camera has a combination of optical and digital zoom functions that allows you to zoom in on far away subjects or zoom out for a wide angle shot.

The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital zoom enlarges or shrinks the image using a software process.

1Select the zoom setting, and point the camera at the subject.

2Press the zoom button () to

compose the image.

[W]: zoom out for a wide-angle

shot.

[T]: zoom in for a telephoto shot.

When the zoom button is pressed, the zoom bar appears on the LCD monitor.

When the optical zoom () factor is at maximum, zooming stops temporarily. Press the

[T]again, the camera switches to the digital zoom () automatically and zooming continues.

The digital zoom () will not activate in movie recording.

3Press shutter button to take a picture.

Tips

Digital zoom works by enlarging the center portion of an image through a software interpolation process.

The digital zoom is used to achieve magnification levels up to approx. 4 times.

28

Page 32
Image 32
HP CA-340 manual Using the Zoom Function, Press shutter button to take a picture Tips