Initial Settings

When the camera is powered up for the first time, please set the display language and date & time.

Setting the Language

1. Press directional buttons to move through the selection.

2. Highlight the desired a language, and then press OK button

.

Setting the Date & Time

1.Press left and right direction buttons to move through the selection.

2.Press the up and down buttons to change the value for the date and time.

3.

Press OK button

when finished. This will save your date and time settings.

4.

If necessary, press Menu button

to close the menu.

At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.

•If the camera is without battery power for more than 48 hours, the initial settings may reset and require another setup.

Modes Selector Switch

This camera has a three mode selector switch. The different modes are:

Photo Mode

•Slide the mode switch to [ ] take photos and record audio clips by selecting Voice REC from scene modes (see pages 12 for additional details).

Video Mode

•Slide the mode switch to [ ] record videos (see page 29 for additional details).

Playback Mode

•Slide the mode switch to [ ] view and edit captured images or playback videos and audio clips. The recording of voice memo attached to images is also available in this mode.

13