Using Manual Exposure

When the camera is in the manual exposure mode, you can change either aperture or shutter speed, or both.

To activate Manual Exposure

1. Select from the Scene Mode submenu.

2. Press OK button

to enter the adjust mode.

3.Use the or keys to select the shutter speed.

4.Or, use the or keys to select the aperture value.

5. Use the OK button to switch between aperture and shutter speed adjustment and vice versa.

6. Press the Shutter button to capture the image.

Displays the aperture and shutter speed value

Using Voice Recording

1.From the Scene menu, select . The Voice Recording screen layout is displayed on the LCD monitor.

2.Press the Shutter button to start recording.

3.Press the Shutter button again to stop recording.

Setting the Drive Mode

This camera features a Self-timer and Burst which can be set in the Burst mode function in the Record Menu. The Self-timer will take photos after a predefined delay. The burst will take consecutive shots. This function is only available in Photo mode. The Burst mode setting is automatically set to off when you turn off the camera.

To set the Drive Mode

1.From the Record menu, select Drive Mode.

2.Use the or keys to go through the selection.

3. Press the OK button

to save and apply changes.

The table below shows the available Drive mode settings.

41