Samsung 6B manual Customising Your Keyset, Select Ring Tone, Change Your Passcode, SET Answer Mode

CUSTOMISING YOUR KEYSET

SELECT RING TONE

Each keyset user can select any one of eight ring frequencies:

•While on-hook, press TRSF followed by 111.

•Dial 1-8or press the UP and DOWN keys to hear each tone.

•When you hear the tone that you prefer, press TRSF to save it.

CHANGE YOUR PASSCODE

At installation, your station passcode is 1234. You can change your station passcode whenever you desire.

•While on-hook, press TRSF followed by 101.

•Dial your old passcode.

•Dial a new passcode (must be four characters). You can use 0-9, ✱ and #.

•Dial your new passcode to verify. If successful, you will hear two beeps. Four beeps indicate an incorrect code. (enter the code again.)

•Press TRSF to store new passcode.

SET ANSWER MODE

You can receive internal calls in one of three modes (see Answering Intercom Calls under Intercom Calls for descriptions):

•While on-hook, press TRSF followed by 103.

•Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.

•Press TRSF to store your selection.

AUTOMATIC HOLD

While on a outside call, pressing a line key, route key or a flashing CALL button will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset.

•While on hook, press TRSF followed by 110.

•Dial 01 to turn Automatic Hold on or 00 to turn it off.

•Press TRSF to store your selection.

31