LOCKING YOUR KEYSET

You can allow/disallow incoming/outgoing calls from your keyset using this option. There are three possible levelst:

1.Unlocked - you can use your keyset without restriction,

2.Locked all - prevents anyone from making or receiving calls from your keyset.

3.Locked out - prevents anyone from making an external call but allows incoming calls as normal.

While on-hook, press TRSF and then dial 100.

Dial your four digit station passcode.

Dial 0 for Unlock,

1for Locked out.

2for Locked all,

Press TRSF to store your selection.

NOTE: According to the status of your keyset, the following visual indication will be provided:

Unlock

as normal

Locked out

the HOLD key light will flash slowly.

Locked all

the HOLD key light will be on steady

OFF-HOOK VOICE ANNOUNCING (OHVA)

Keysets may receive a voice announcement while on another call. The calling station must be a display Keyset or have an OHVA key. The OHVA feature will work with all types of call.

To make an off-hook voice announcement:

Dial the extension number or press the DSS key.

When you receive a busy signal, press the OHVA key.

After the attention tone, begin speaking.

Finish the call by replacing handset or pressing the ANS/RLS key.

NOTES: 1. When you are voice announcing to a station close to you, use the handset to avoid an echo effect.

2.You cannot off-hook voice announce to single line telephones or Keysets in DND.

29

Page 37
Image 37
Samsung STD 12B, LCD 12B, LCD 24BI, STD 24B, 6B manual Locking Your Keyset, OFF-HOOK Voice Announcing Ohva