3-7-1 Onboard IDE Function
CMOS Setup Utility – Copyright(C)
OnChip IDE Function
|
|
|
|
|
|
|
|
OnChip IDE Channel0 |
| Enabled |
| Item Help | |||
OnChip IDE Channel1 | Enabled |
|
| ||||
Primary | Master | PIO | Auto |
|
| ||
| Menu Level >> | ||||||
Primary | Slave | PIO | Auto |
| |||
Secondary | Master | PIO | Auto |
|
| ||
Secondary | Slave | PIO | Auto |
|
| ||
Primary | Master | UDMA | Auto |
|
| ||
Primary | Slave | UDMA | Auto |
|
| ||
Secondary | Master | UDMA | Auto |
|
| ||
Secondary | Slave | UDMA | Auto |
|
| ||
IDE | Enabled |
|
| ||||
IDE HDD | Block Mode | Enabled |
|
| |||
IDE Prefetch Mode |
| Enabled |
|
| |||
Delay For | HDD (Secs) | 0 |
|
| |||
|
|
|
|
|
|
|
|
↑↓→← Move Enter:Select
F5:Previous Values F6:Optimized Defaults | F7:Standard Defaults |
OnChip IDE Channal0/Channel1
The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. The settings are: Enabled and Disabled.
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set PIO mode
Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive has the support and the operating environment includes a DMA driver (Windows 95 OSR2 or a
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support. The settings are: Enabled, Disabled.
26
