AMD N2PAP-LITE, N2PA-LITE user manual Advanced Bios Features, Time, ATA, Scsi, Cdrom

Time

The time format is <hour><minute><second>.

Primary Master/Primary Slave

Secondary Master/Secondary Slave

Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If your hard disk drive type is not matched or listed, you can use Manual to define your own drive type manually.

If you select Manual, related drive specifications information are required to be entered. Enter the information directly from the keyboard. This information is provided from the documentation of your hard disk.

If the controller of HDD interface is SCSI, the selection shall be “None”.

If the controller of HDD interface is CD-ROM, the selection shall be “None”

Access Mode	The settings are Auto Normal, Large, and LBA.
Cylinder	number of cylinders
Head	number of heads
Precomp	write precomp
Landing Zone	landing zone
Sector	number of sectors

3-5 Advanced BIOS Features

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software

Advanced BIOS Features

Anti-Virus Protection		Disabled	Item Help
CPU L1 Cache	Enabled
CPU L2 Cache	Enabled
Quick Power On Self Test	Enabled		Menu Level >
SATA & SCSI Boot Order		ATA, SCSI
HDD Boot Sprite	Disabled
First Boot Device		Floppy
Second Boot Device	HDD-0
Third Boot Device	CDROM
Boot other Device	Enabled
Swap Floppy Drive	Disabled
Boot Up Floppy Seek	Enabled
Boot Up NumLock Status	On
Gate A20 Option	Normal
Typematic Rate Setting	Disabled
Typematic Rate (Chars/Sec)	6
Typematic Delay (Msec)	250
Security Option	Setup
OS Select For DRAM > 64MB	Non-OS2
HDD S.M.A.R.T. Capability	Disabled
Video BIOS Shadow	Enabled

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

22