HP CD-9400 SPECIAL FEATURES, QUICKLY SELECTING TRACKS, SEARCHING FOR A SECTION OF A TRACK, ASSIGNING CDS TO A CUSTOM CD GROUP, Checking the Custom Group Contents

SPECIAL FEATURES

QUICKLY SELECTING TRACKS

When the CD changer is stopped or paused, press 4

1or ¡ ¢(or 4or ¢on the remote control) until the CD changer displays the desired track’s number. Or, enter the track number using the remote control’s number buttons, then press TRACK SET within 5 seconds.

If you use this feature while a CD plays, the CD changer stops playing the current track and skips to the next or previous track.

SEARCHING FOR A SECTION OF A TRACK

To rapidly search forward or backward for a track section while a CD plays, hold down ¡¢ or 4 1on the front panel (¡or 1 on the remote control). The display shows the elapsed time to help you locate the desired section, and the CD plays at a lower volume and higher speed than normal. Release the button to resume normal play.

You can also search a track when a CD is paused. The searching speed is faster, the display shows only the minutes, and you do not hear the CD play.

Note: You cannot search past the end (End appears on the display) or the beginning of a CD.

ASSIGNING CDS TO A CUSTOM CD GROUP

You can assign any loaded CD into a custom CD group. This lets you group your favorite CDs together for more convenient playback.

Follow these steps to assign CDs to a group.

1.While the CD changer is stopped, repeatedly press MODE until CUSTOM and the number of the desired group light. (If any discs have been assigned to the group, the lowest disc number appears on the display. Press CLEAR to clear the group.)

2.Select a CD for storing into the group.

•If you use 2DISC NUMBER 3, simply wait until the display blinks. The disc number is automatically stored in memory.

•If you use the remote control’s number buttons, press DISC SET to store the disc number in memory.

3.Repeat Step 2 to store all the CDs you want.

Notes:

•The custom group memory is kept even after you turn off the CD changer.

•The changer keeps the CDs stored in custom group memory for a few minutes in the event of a power loss.

Checking the Custom Group Contents

With the CD changer stopped, repeatedly press MODE so CUSTOM and the number of the desired group light. Then repeatedly press DISPLAY so C and the custom group number appear on the display. Then repeatedly press DISC NUMBER 3. The programmed disc numbers appear in order as you press DISC NUMBER 3.

Notes:

To change the CDs assigned to a custom CD group, you must clear all the entries and enter the desired CDs again.

Erasing All the CDs from a Custom Group

With the CD changer stopped, repeatedly press MODE so CUSTOM and the number of the desired group light Then press CLEAR. (You cannot partially erase a custom group memory.)

11