PREPARING YOUR CD CHANGER

CONNECTING THE CD CHANGER TO YOUR RECEIVER/AMPLIFIER

Caution: Do not connect the CD changer to AC power until you complete all other connections.

1.Select a location for your CD changer that is near your receiver/amplifier and a standard AC outlet.

2.Plug one end of the supplied audio cable into the CD changer’s L (left) and R (right) LINE OUT jacks, matching the red plug to the red R LINE OUT jack and the white plug to the white L LINE OUT jack.

3.Plug the other end of the audio cable into the receiver’s or amplifier’s left and right CD, AUX, or TAPE input jacks.

Cautions

Do not connect the CD changer to the receiver’s or amplifier’s PHONO inputs.

Do not place the CD changer on top of the receiver/ amplifier or any other component that gets hot.

Note: If you place the CD changer too near other audio components or their wires, you might hear a hum when you play a CD. Move the components or their wires to eliminate the hum.

CONNECTING TO ANOTHER DIGITAL AUDIO PRODUCT

You can connect the CD changer to another digital audio product such as a digital recorder. You need an optical cable (available through your local RadioShack store) for this connection. To make the connection, remove the protective dust cap from the digital jacks, and connect the optical cable to the jacks.

Note: Be sure to leave the dust cap in place when you are not using the jack.

CONNECTING POWER

After you have connected the CD changer to your receiver or amplifier, plug the CD changer’s power cord into a standard AC outlet.

Caution: To prevent electric shock, the plug’s blades are polarized and fit only one way. If the plug does not fit easily, turn it over and try again. Do not force the plug into any AC outlet.

Note: Do not connect the CD changer’s power cord to an amplifier or other switched outlet. The CD changer loses memorized settings when power is removed.

Receiver/Amplifier

 

INPUT

 

TAPE/DCC

TAPE 2

PHONO

CD

VCR/

REC

PLAY

REC __ PLAY

L

L

LD

 

L

L

 

 

CONTROL

R

R

R

R

OUT

 

 

IN

 

CD Changer

 

 

 

 

 

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

CD•DECK

 

 

 

SYNCHRO

 

R L

LINE OUT

DIGITAL OUT

OPTICAL

CONNECTING TO A CASSETTE DECK’S SYNCHRO JACK

The Synchro-Record feature lets you easily copy CDs to cassette tapes. If you have a cassette deck that has a CD•DECK SYNCHRO jack, the CD changer can automatically start and stop with the cassette deck. Connect the CD•deck synchro-cord, supplied with the cassette deck,

R

L

L

R

to the CD changer’s and cassette deck’s CD•DECK SYNCHRO jacks.

For details on connection and operation refer to the cassette deck’s owner’s manual.

5

Page 5
Image 5
HP CD-9400 manual Preparing Your CD Changer, Connecting the CD Changer to Your RECEIVER/AMPLIFIER, Connecting Power