System Configuration menu
NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select | To do this | |
|
| |
Language | Change the Computer Setup language. | |
|
| |
Boot options | ● Set an f9, f10, and f12 delay when starting up. | |
| ● Enable/disable | |
| ● Enable/disable floppy boot. | |
| ● Enable/disable internal network adapter boot. | |
| ● Enable/disable MultiBoot, which sets a boot order that | |
| can include most boot devices in the system. | |
| ● Set the Express Boot Popup delay in seconds. | |
| ● Set the boot order. | |
| ◦ | 1st boot device: USB |
| ◦ | 2nd boot device: USB floppy |
| ◦ | 3rd boot device: USB SuperDisk |
| ◦ | 4th boot device: Notebook hard drive |
| ◦ | 5th boot device: USB hard disk |
| ◦ | 6th boot device: Network controller |
|
| |
Device Configurations | ● Swap the functions of the fn key and left ctrl key. | |
| ● Enable/disable USB legacy support. When enabled, | |
| USB legacy support allows the following: | |
| ◦ | Use of a USB keyboard in Computer Setup even |
|
| when a your operating system is not running. |
| ◦ | Startup from bootable USB devices, including a |
|
| hard drive, diskette drive, or optical drive |
|
| connected by a USB port to the computer. |
● Enable/disable BIOS DMA data transfers.
● Enable/disable fan always on while connected to an AC outlet.
● Enable/disable data execution prevention.
●
●
●
●
106 Chapter 5 Setup Utility | ENWW |
