Hard drive

NOTE: The hard drive spare part kit does not include the hard drive cable, or hard drive bracket and screws.

Description

Spare part number

 

 

9.5 mm (0.37 in) × 6.35 cm (2.50 in), 320 GB, 5400 rpm, SATA

622643-005

 

 

7.0 mm (0.28 in) × 6.35 cm (2.50 in), 320 GB, 5400 rpm, SATA

645193-005

 

 

16 GB solid-state drive, SATA

713526-001

 

 

Hard Drive Hardware Kit (includes hard drive cable, and hard drive bracket and screws)

697905-001

 

 

IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.

Before removing the hard drive, follow these steps:

1.Shut down the computer.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 20).

5.Remove the keyboard (see Keyboard on page 24).

6.Remove the top cover (see Top cover on page 28).

Remove the hard drive:

1.Disconnect the USB cable on top of the hard drive from the computer.

NOTE: If it is necessary to replace the hard drive cable, see System board on page 38.

32 Chapter 4 Removal and replacement procedures