c.Remove the wireless antenna cables and transceivers (2).
Reverse this procedure to reassemble and install the display assembly.
Power connector
Description | Spare part number |
|
|
Power connector | |
|
|
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
Before removing the power connector, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 20).
5.Remove the keyboard (see Keyboard on page 24).
6.Remove the top cover (see Top cover on page 28).
7.Remove the hard drive (see Hard drive on page 32).
8.Remove the USB board (see USB board/Audio jack on page 34).
9.Remove the WLAN (see WLAN module on page 35).
10.Remove the system board (see System board on page 38).
11.Remove the display assembly (see Display panel on page 22).
Remove the power connector:
Component replacement procedures 53