2.Lift the RJ-45 cover (2) to remove it from the base enclosure.

Reverse these procedures to replace the RJ-45 cover.

Display Assembly

Description

Spare part number

 

 

Antenna Kit (includes left and right wireless antenna cables and transceivers)

697913-001

 

 

Display Panel Cable Kit (includes display panel cable and webcam/microphone module cable)

697911-001

 

 

Back cover, sparkling black

708133-001

 

 

Display Hinge Kit (includes left and right display hinges and brackets)

697908-001

 

 

Webcam/microphone module

697903-001

 

 

IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.

Before removing the display assembly, follow these steps:

1.Shut down the computer.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 20).

5.Remove the display panel (see Display panel on page 22).

6.Remove the keyboard (see Keyboard on page 24).

7.Remove the top cover (see Top cover on page 28).

8.Remove the hard drive (see Hard drive on page 32).

9.Remove the USB board (see USB board/Audio jack on page 34).

10.Remove the WLAN (see WLAN module on page 35).

11.Remove the system board (see System board on page 38).

50 Chapter 4 Removal and replacement procedures