hp pavilion f50/f70 LCD Monitor Setting Up the Monitor

Setting Up the Monitor

Place the monitor on a flat, sturdy surface. Ensure that the operating site is free from excessive heat and moisture. For best performance, make sure nothing is resting on the monitor.

!

 

WARNING:

Before you connect any cables or install the HP

 

 

monitor, refer to the safety instructions at the

 

 

beginning of this manual. Refer also to the

 

 

 

 

 

 

documentation that came with the computer to

 

 

 

ensure this equipment is correctly installed.

 

 

 

 

 

Connecting two computers to the monitor

The LCD monitor has two video signal connectors on the rear panel: one analog (VGA) and one digital (DVI-D). This allows you to connect the monitor to two computers at the same time.

Video

connectors

DVI VGA

When two computers are connected, you need to use the Input Priority setting on the onscreen display (OSD) to switch from one video signal to the other. See “Input Priority” on page 33. The LCD must be set to one signal or the other to operate properly.

11