hp pavilion f50/f70 LCD Monitor Setting Up the Monitor

Connecting the cables to the f70 monitor

Look at the following diagram and follow the steps listed below to connect the cables to the f70 17-inch LCD monitor.

CAUTION: This monitor is equipped with an auto-sensing power supply for voltage ranges 100—240 V~, 50/60 Hz. Use the monitor with the supplied DC adapter only.

 

DC In

Video

 

cable

connectors

 

 

DVI VGA

 

Volume

 

 

control

 

 

Video cable

 

Microphone

(VGA)

 

 

 

(pink)

Audio

DC adapter

Audio out

cable

 

with attached DC cable

(green)

 

 

 

 

OR

 

 

 

Power

 

 

cord

Power source

To connect the cables to the f70 monitor:

1Make sure the computer is turned off.

2Plug the video cable into the correct video connector (VGA or DVI-D) on the back of the monitor and into the corresponding video connector on the computer. Secure the cable by tightening the thumbscrews.

VGA cable →

VGA connector

 

 

DVI-D cable →

DVI-D connector

 

 

14 English