this | may receive this input... | so you need to... | |
component... | |||
|
| ||
|
|
| |
TV | — cable TV | Set your TV to display the desired video input: | |
| — de100c video content | — Look on your TV’s remote for an Input or | |
| — content from other | Input Sel button (or similar) and scroll | |
| through the options. | ||
| video sources, such as | ||
| — Some TVs use the channel changer to select | ||
| a VCR or DVD player, | ||
| or video game system | the input: set your TV to the lowest channel, | |
|
| then press the “channel down” button to | |
|
| access another input line. | |
|
| — If your TV has an onscreen menu, go to the | |
|
| menu and look for an input setting there. | |
|
|
| |
VCR | — cable TV | Set your VCR to pass the desired video input: | |
| — de100c video content | — Look on your VCR’s remote for an Input or | |
|
| Input Sel button and scroll through the | |
|
| options. | |
|
| — Some VCRs use the channel changer to | |
|
| select the input: set your VCR to the lowest | |
|
| channel, then press the “channel down” | |
|
| button to access another input line. On | |
|
| many VCRs the choices are line 1 out or | |
|
| line 2 out. | |
|
|
| |
receiver | — radio stations (from its | Set the receiver’s audio input mode to match | |
| internal tuner) | the set of jacks you used when you connected | |
| — de100c audio from the | the de100c to the receiver (typically CD or | |
| audio cable | AUX): | |
| — Look on the receiver’s front panel for | ||
| — sound from another | ||
| buttons or a knob to set the audio input. | ||
| entertainment device, | ||
| — Look on your receiver’s remote for an Input | ||
| such as a tape deck, | ||
| VCR or DVD player | or Input Sel button and scroll through the | |
|
| options. | |
|
|
|
tip
If you are troubleshooting your audio and video settings, start with the digital entertainment center and work your way to the output components — your television for video, and your speakers for audio. Check your connections and settings along the way.
This will help you ensure that each component is set correctly before you spend time adjusting the more remote components. For example, you should set your VCR to pass on the desired input, then make sure the TV is set to display input from the VCR.
up setting and installing
hp digital entertainment center owner’s guide | 83 |