|
|
| EFFECT FUNCTIONS |
|
|
| |
Fader Effector (effects linked to channel or cross fader) |
| ||
|
|
|
|
| Name | Function | FX ADJ. Parameter (touch panel) |
|
|
|
|
36 | FADER ROLL (*2) | EFFECT switch turn ON or fader position is | Select either channel fader or cross fader. |
|
| used as trigger to record input sound, and | Set base ROLL time to 1/2, 1/1, or 2/1. |
|
| then output the sound repeatedly within |
|
|
| range of 1/1 to 1/16 beat. |
|
|
|
|
|
37 | FADER MULTI TAP DELAY | At preset intervals repeat sound is output at | Select either channel fader or cross fader. |
| (*1) | 1/1 to 1/16 beat set with fader. | Set basic beat time of 1/2 to 2/1 for each BPM beat, and |
|
|
| set delay pattern selection. |
|
|
|
|
38 | FADER TRANS PAN | In time with the BPM, | Select either channel fader or cross fader. |
|
| output is cut at time corresponding to fader | Set PAN operation period and basic effect time to be cut |
|
| position. | with fader. |
|
|
|
|
39 | FADER PITCH SHIFTER | In response to fader position, pitch of input | Select either channel fader or cross fader. |
|
| sounds is changed. | Set type of pitch change. |
|
|
|
|
40 | FADER RING | Produces metallic bass sound effect. | Select either channel fader or cross fader. |
|
|
| Set frequency of sound effect. |
|
|
|
|
41 | FADER VOCODER1 | Vocoder effect; modulates internal oscillator | Select either channel fader or cross fader. |
|
| sound in response to input sound. Depending | Set code type. |
|
| on fader position, changes internal oscillator |
|
42 FADER VOCODER2 |
| ||
sound’s fundamental frequency. 7 code |
| ||
|
|
| |
|
| sounds can be added. |
|
|
|
|
|
43 | FADER FILTER (LPF) | Changes | Select either channel fader or cross fader. |
|
| depending on fader position. |
|
|
|
|
|
44 | FADER FILTER (HPF) | Changes | Select either channel fader or cross fader. |
|
| depending on fader position. |
|
|
|
|
|
45 | FADER FILTER (BPF) | Changes | Select either channel fader or cross fader. |
|
| depending on fader position. |
|
|
|
|
|
46 | FADER FLANGER | Changes frequency band subjected to flanger | Select either channel fader or cross fader. |
|
| effect, depending on fader position. |
|
|
|
|
|
47 | FADER PHASER | Changes frequency band subjected to phaser | Select either channel fader or cross fader. |
|
| effect, depending on fader position. | Set number of filter stages producing phase effect. |
|
|
| Greater numbers of stages produce deeper effects. |
|
|
|
|
48 | FADER SYNTHE1 | Outputs sine wave sound source. | Select either channel fader or cross fader. |
|
|
| Select frequency equivalent to note “DO”. |
|
|
|
|
49 | FADER SYNTHE2 | Outputs sawtooth wave sound source. | Select either channel fader or cross fader. |
|
|
| Select frequency equivalent to note “DO”. |
|
|
|
|
50 | FADER SYNTHE3 | Outputs square wave sound source. | Select either channel fader or cross fader. |
|
|
| Select frequency equivalent to note “DO”. |
|
|
|
|
(*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor SELECT switch is set to the [EFFECT] position.
(*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT] position.
21
<DRB1349>