QuickSpecs

HP ProLiant DL360 Generation 4p (G4p)

Memory

HP ProLiant DL360 G4p RPS Models

Standard Memory

2 GB PC3200 DDR 400 Registered SDRAM DIMM installed (2 x 1 GB SDRAM DIMM)

Upgrading Memory and Memory Interleaving

When upgrading memory, DIMMs 1A and 2A must match. DIMMs 3B and 4B, and DIMMs 5C and 6C must match and must be installed as a pair. When DIMMs 1A and 2A are populated the system is automatically configured for 2:1 interleaving. When four or six DIMMs are populated with identical DIMMs the system is automatically configured for bank interleaving.

Standard Memory Plus Optional Memory

Up to 10 GB memory is available with the standard memory of 2 GB and the optional installation of PC2-3200 DDR2 400 Registered SDRAM DIMM memory kits.

Standard Memory Replaced with Optional Memory

Up to 12 GB of memory is available with the removal of the standard 1 GB of memory and the optional installation of PC2-3200 DDR2 400 Registered SDRAM DIMM memory kits.

NOTE: Chart does not represent all possible configurations.

Memory

 

 

 

 

Slot

 

 

 

 

 

1

2

3

 

4

5

6

Standard

 

2 GB

1 GB

1 GB

Empty

 

Empty

Empty

Empty

Optional

 

10 GB

1 GB

1 GB

2 GB

 

2 GB

2 GB

2 GB

Maximum

 

12 GB

2 GB

2 GB

2 GB

 

2 GB

2 GB

2 GB

NOTE: In the online spare configuration, the ROM automatically configures the last populated bank as the spare memory. If only banks A and B are populated, bank B is the spare bank. If banks A, B, and C are populated, bank C is the spare bank, Online spare memory is configured through RBSU.

Following are memory options available from HP:

1

GB Advanced ECC PC2-3200

DDR2

SDRAM DIMM Memory Kit (2 x 512 MB)

343055-B21

2

GB Advanced ECC PC2-3200

DDR2

SDRAM DIMM Memory Kit (2 x 1 GB)

343056-B21

4

GB Advanced ECC PC2-3200 DDR2 SDRAM DIMM Single Rank Memory Kit (2 x 2 GB)

343057-B21

4

GB Advanced ECC PC2-3200

DDR2 SDRAM DIMM Dual Rank Memory Kit (2 x 2 GB)

375004-B21

 

 

 

 

 

NOTE: Online Spare Memory is not supported when using 2-rank DIMMs. A total of 8 ranks are supported on the HP ProLiant DL360 G4p, A maximum of 4, 2-rank DIMMs can be populated. If you plan to mix DIMM types, 2-rank DIMMs must be installed in the first bank, 1 rank DIMMs can then be installed in subsequent banks.

The following is the memory population rules for the HP ProLiant ProLiant DL360 G4p.

Key: S denotes single rank kit, D denotes Dual rank kit, and X denotes no install.

Bank A

Bank B

Bank C

NOTES:

S

X

X

 

S

S

X

 

S

S

S

 

D

X

X

Online spare not supported

D

S

X

Online spare not supported

D

S

S

Online spare not supported

D

D

X

Online spare not supported

DA - 12166 North America — Version 24 — August 15, 2006

Page 39