QuickSpecs

HP ProLiant DL360 Generation 4p (G4p)

Standard Features

Rack Airflow

Rack 10000 series Cabinets

Requirements

The increasing power of new high-performance processor technology requires increased cooling

 

efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum

 

cooling, allowing these racks to be fully loaded with servers using the latest processors.

 

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure

 

adequate airflow and to prevent damage to the equipment:

 

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must

 

allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit

 

adequate airflow (equivalent to the required 64 percent open area for ventilation).

 

Side: The clearance between the installed rack component and the side panels of the rack must be

 

a minimum of 2.75 inches (7 cm).

 

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This

 

arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling

 

that can lead to thermal damage.

 

NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD

 

provided with the server, or to the server documentation located in the Support section at the following

 

URL: http://h18000.www1.hp.com/products/servers/proliantdl360/index.html.

 

 

Factory Express Portfolio

HP Factory Express offers configuration, customization, integration and deployment services for HP

for Servers and Storage

servers and storage products. Customers can choose how their factory solutions are built, tested,

 

integrated, shipped and deployed.

 

Factory Express offers service packages for simple configuration, racking, installation, complex

 

configuration and design services as well as individual factory services, such as image loading, asset

 

tagging, and custom packaging. HP products supported through Factory Express include a wide array of

 

servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000

 

servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network

 

switches.

 

For more information on Factory Express services for your specific server model please contact your sales

 

representative or go to http://www.hp.com/go/factory-express.

 

 

Customer Builder

Please see the Enterprise Configurator for configuration assistance at:

 

http://www.hp.com/products/configurator.

 

 

DA - 12166 North America — Version 24 — August 15, 2006

Page 9