6.Disconnect and remove the camera cable (5) from the system board.
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.
7.Remove the display hinge cover (2).
Release the hinges by removing the six Phillips PM2.5x5.0 screws 1 that secure it to the base enclosure. First remove the left hinge and then the right.
NOTE: On the left side, one of the screws secures a display support strap. On the right side, the
After removing all six screws (1), note that the cables on the hinges (2) may interfere with the removal of the display. Simply move the panel (3) around the cables and then lift (4). On the right side, there is a metal plate that you must workaround to remove the display.
58 | Chapter 4 Removal and replacement procedures |