HP DS73, DS73TP 5.1MODULE IP ADDRESS

Bay Technical Associates
Port Select Code: $BT
Attention Character:	;
DS73	(2,1)....................	1
Device A	(3,1)....................	2
Device B	(3,2)....................	3
Device C	(3,3)....................	4
Device D	(3,4)....................	5
Configure ...............................		C
I/O Module Reset ........................		RM
Unit Reset ..............................		RU
Exit ....................................		X
Logout ..................................		T
Enter Request	: C
Configuration
Module 1...............		1
Module 2...............		2
Module 3...............		3
Select Port............		S
Exit...................		X
Enter Request:	2

By responding to the Enter Request: message at the end of the configuration menu with “2” you receive the configuration menu for Module 2 that looks similar to the following:

DS73 Ethernet Module

Bay Technical Associates

Enter user name: user1
Enter password: BTA
Login successful.
Module IP Address:	200.4.3.72	Dial-In IP Address:	200.4.3.73
Subnet Mask:	255.255.255.0	Gateway Addr: 200.4.3.1
Primary DNS:	0.0.0.0.	Secondary DNS:	0.0.0.0.
Primary NBNS:	0.0.0.0.	Secondary NBNS:	0.0.0.0.
Ethernet Addr: 00.C0.48.1A.24.5D		ID MSG/Login: enabled/enabled
IP Address....................	1	Network Cable Connections: good
Module IP Address.............	1
Dial-In Ip Address............	2
Subnet Mask...................	3
Gateway.......................	4
Primary DNS...................	5
Secondary DNS.................	6
Primary NBNS..................	7
Secondary NBNS................	8
User Name.....................	9
Password.....................	10
Module name...................	11
Exit..........................	X

NOTE: For detailed configuration information see the DS-Series Owner’s Manual Number U140E121-03(Section 6).

IMPORTANT: There should be no active connections while configuring the unit. Reset the base unit after configuration.