15.Disconnect the camera/microphone module cable from the module (2), and remove the camera/ microphone module. The camera/microphone module is available using spare part number
16.If it is necessary to replace the display panel, remove the four Phillips PM2.5×4.0 screws (1) that secure the panel to the display enclosure.
17.Remove the left and right display panel brackets (2).
18.Disconnect the display logo LED board cable (3) from the display panel cable.
19.Remove the display panel (4) from the display enclosure. The display panel is available using the spare part number
20.If it is necessary to replace the display hinges, remove the two Phillips PM2.0×4.0 screws (1) that secure each hinge to the display panel.
46 Chapter 4 Removal and replacement procedures
