![](/images/new-backgrounds/1315845/315845129x1.webp)
TV tuner module
NOTE: The TV tuner module spare part kits do not include a TV tuner module cable. The TV tuner module cable is included in the Cable Kit, spare part number
NOTE: The TV tuner external antenna cables are available using spare part numbers
Description | Spare part number |
|
|
|
|
|
|
NTSC/ATSC/ANG TV tuner module | |
|
|
Before removing the TV tuner module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer.
4.Remove the battery (see Battery on page 52).
Remove the TV tuner module:
1.Position the computer with the front toward you
2.Loosen the Phillips PM2.5×6.0 captive screw (1) that secures the Mini Card module compartment cover to the computer.
3.Lift the right side of the Mini Card module compartment cover (2), swing it to left, and remove the cover (3). The Mini Card module compartment cover is included in the Plastics Kit, spare part number
4.Disconnect the TV tuner module antenna cable (1) from the terminal on the TV tuner module.