Hard drive

NOTE: All hard drive spare part kits include left and right bracket rails, a connector cable, Mylar cover with tab, and 4 rubber isolators.

Description

Spare part number

 

 

Hard drives for use only with computer models equipped with AMD processors:

 

 

 

320-GB, 5400-rpm

462355-002

 

 

250-GB, 5400-rpm

489819-002

 

 

160-GB, 5400-rpm

489818-002

 

 

120-GB, 5400-rpm

489817-002

 

 

Hard drives for use only with computer models equipped with Intel processors:

 

 

 

320-GB, 5400-rpm

462355-001 and

 

489821-001

 

 

250-GB, 5400-rpm

489819-001

 

 

160-GB, 7200-rpm

489820-001

 

 

160-GB, 5400-rpm

489818-001

 

 

120-GB, 5400-rpm

489817-001

 

 

Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with

483862-001

tab, and 4 rubber isolators)

 

 

 

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 52).

Remove the hard drive:

1.Position the computer with the front toward you.

2.Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the hard drive bay cover to the computer.

62 Chapter 4 Removal and replacement procedures