HP DX2250 Sata Ch 1 Master, Sata Ch 1 Slave, Sata Ch 2 Master, Sata Ch 2 Slave, Floppy Controller

Table 3 Computer Setup—Standard CMOS Features (continued)

SATA Ch 1 Master	For each, allows you to:
SATA Ch 1 Slave	●	run HDD self-test for selected channel:
SATA Ch 2 Master		●	SMART Status Check
SATA Ch 2 Slave		●	HDD Short Self-Test
		● HDD Extended Self-Test
	● set extended IDE drive on selected channel to:
		●	None
		●	Auto
	● set access mode on selected channel to:
		●	Large
		●	Auto
	●	view:
		●	Firmware Version
		●	Capacity
		●	Cylinder
		●	Head
		●	Precomp
		●	Landing Zone
		●	Sector
Floppy Controller	Disables/enables the floppy disk controller.
Drive A	Allows you to set Drive A to:
	●	None
	●	1.44M, 3.5 in.
Halt On	Allows you to set POST error behavior to:
	●	All Errors
	●	No Errors
	●	All but Keyboard
	●	All but Diskette
	●	All but Diskette/Keyboard
POST Delay	Allows you to set a POST delay to:
	●	0 seconds
	●	5 seconds
	●	10 seconds

ENWW Computer Setup (F10) Utilities 5