HP DX2250 manual Computer Setup-Advanced Bios Features

●15 seconds

●30 seconds

Computer Setup—Advanced BIOS Features

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 4 Computer Setup—Advanced BIOS Features

Option	Description
Device Boot Disabling	Allows you to restrict a device from booting the unit. You can disable as a bootable device:
	●	None
	●	USB
	●	Internal ODD
	●	Internal FDD
	● USB + ODD + FDD
F9 Boot Menu	Disables/enables F9 Boot Menu.
Factory Recovery Boot	Disables/enables the ability to boot to the Recovery partition at startup. Enabling this feature will add
	the <F11>Recovery prompt to the startup window.
F11 Prompt	Disables/enables the <F11>Recovery prompt at startup. However, if this feature is disabled and
	the Factory Recovery Boot is enabled, pressing F11 will still boot the computer to the Recovery
	partition.
Hard Disk Boot Seq.	Allows you to specify the order of attached hard drive devices (such as USB HDD storage, USB2
	Drive Key, or USB flash media). The first drive in the order has priority in the boot sequence and is
	recognized as drive C (if any devices are attached).
Optical Drive Boot	Allows you to specify the order in which attached optical drives (including USB ODD) are checked
Seq.	for a bootable operating system image.
Network Boot Seq.	Allows you to specify the order in which network devices (including UP NIC cards) are checked for
	a bootable operating system image.
First Boot Device	Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the
Second Boot Device	four:
	●	Removable
Third Boot Device
	●	Hard Disk
Fourth Boot Device
	●	CDROM
	●	Network
	●	Disabled
			NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
			system has started.
Boot Up NumLock	Allows you to set the default NumLock status to off or on.
Status

6 Computer Setup (F10) Utility ENWW