HP dx2450 Computer Setup—Boot, Computer Setup—Exit

Computer Setup—Boot

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 2-4Computer Setup—Boot

Option	Description
Boot-time Diagnostic	Disables/enables POST diagnostic messages display.
Screen
1st Boot Device	Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
2nd Boot Device	of the four:
	●	Floppy Group
3rd Boot Device
	●	Hard Drive Group
4th Boot Device
	● CD-ROM Group
	●	Network Boot Group
	NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
	has started.
Floppy Group Boot	Specifies boot device priority within removable devices.
Priority
CD-ROM Group Boot	Specifies boot device priority within CD/DVD drives.
Priority

Hard Drive Group Boot Specifies boot device priority within hard drives.

Priority

Network Group Boot Specifies boot device priority within bootable network devices.

Priority

Computer Setup—Exit

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 2-5Computer Setup—Exit

Option	Description
Exit Saving Changes	Press Enter to exit saving changes.
Exit Discarding	Press Enter to exit discarding changes.
Changes
Load Setup Defaults	Press Enter to load setup defaults.
Discard Changes	Press Enter to discard changes.
Save Changes	Press Enter to save changes.

Computer Setup (F10) Utilities 7