Setup Utilities and Diagnostics Features
Computer Setup (Continued)
Heading
OptionDescription
Standard
CMOS
Features
(continued)
SATA Port 0
SATA Port 1
SATA Port 2
SATA Port 3
For each, allows you to:
•detect HDD size and head on selected channel
•set extended drive on selected channel to:
•None
•Auto
•Manual
•set access mode on selected channel to:
•CHS
•LBA
•Large
•Auto
•view:
| • | Capacity |
| • | Cylinder |
| • Head | |
| • | Precomp |
| • | Landing Zone |
| • | Sector |
| No SMART HDD installed. | |
|
|
|
SATA Port 0/1 | Native |
|
Working Mode | Legacy |
|
|
| |
Halt On | Allows you to set at: | |
| • All Errors | |
| • No Errors | |
• All but Keyboard
• All but Diskette
• All but Disk/Key
Advanced | Quick Power On Self Test | Disables/enables the system to skip certain |
BIOS Features |
| tests while booting. |
|
| Enabling this feature decreases the time |
|
| required to boot the system. |
|
|
|
| POST Delay Time (seconds) | Allows you to set a POST delay time to: |
|
| • 0 Sec |
|
| • 5 Sec |
|
| • 10 Sec |
|
| • 15 Sec |
✎Support for specific Computer Setup options may vary depending on the hardware configuration.
| Service Reference Guide |