QuickSpecs

HP Compaq dx7500 Business PC

System Details

Base Unit

MT: Micro ATX Microtower chassis, including power supply and front bezel; five (5) drive bays

 

and four expansion slots

 

SFF: Micro ATX Small Form Factor chassis, including power supply and front bezel; three (3) drive

 

bays and four expansion slots

 

Active type heatsink

 

 

92 x 92 x 25 mm chassis fan for Microtower chassis

 

No chassis fan for Small Form Factor chassis

 

System board with Intel G45 Express chipset, Intel I/O Controller Hub 10R (ICH10R), Intel

 

WG82567V Ethernet controller, Intel GMA X4500HD graphics, and Realtek audio, (3) PCI

 

Express x1 slots, (1) PCI Express x16 slot, (4) DDR2 DIMM memory slots, (4) Serial ATA data

 

connectors, (10) USB Ports (see USB support below), 1394 Firewire, SPDIF coaxial In/Out

 

Power cord

 

 

 

 

Slots

PCI

PCI Express x1 slots

 

 

MT: (3) full-height (4.34”), length (6.6”), Max power per slot 10W

 

 

SFF: (3) low-profile (2.73”), length (6.6”), Max power per slot 10W

 

 

PCI Express x16 slot (for graphic cards)

 

 

MT: (1) full-height (4.34”), length (9.5”), Max power per slot 75W

 

 

SFF: (1) low-profile (2.73”), length (6.6”), Max power per slot 25W

 

Memory Expansion

Four (4) DDR2 SDRAM DIMM slots (16 GB maximum memory support)

NOTE: For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available due to system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.

Bays

Internal

MT: Two (2) 3.5-inch

 

 

SFF: One (1) 3.5-inch

 

External

MT: Two (2) 5.25-inch; One (1) 3.5-inch

 

 

SFF: One (1) 5.25-inch; One (1) 3.5-inch

 

 

USB Support

EHCI high-speed USB 2.0 controller

 

MT: Three (3) front ports; four (4) rear ports, three (3) internal ports on system board

 

SFF: Two (2) front ports; four (4) rear ports, four (4) internal ports on system board

 

 

 

DA - 13152 Worldwide QuickSpecs — Version 9 — 3/30/2009

Page 8