HP Deskpro E 2/12e, E 3/20e manual 55

POST Error Messages Continued
Screen Message	Beeps*	Probable Cause	Recommended Action
914-Hood Lock Coil is not	None	Hood lock mechanism is	1.	Reconnect or replace hood
Connected		missing or not connected.		locking mechanism.
			2.	Reseat or replace hood locking
				mechanism cable.
916-Thermal Sensor from	None	Processor heatsink cable not	Reseat or replace the processor
Processor Heatsink is not		connected to system board.	heatsink cable going to the system
Connected.			board.
917-Expansion Riser not	None	Riser board not seated or not	Install riser board if missing or
Detected		installed.	remove and reseat to ensure good
			connection.
1151-Serial Port 1 Address	2S	Both external and internal	1.	Remove any Comm port
Conflict Detected		serial ports are assigned to		expansion cards.
		COM1.	2.	Clear CMOS.
			3.	Reconfigure card resources
				and/or run Computer Setup
				(F10 Setup).Run Computer
				Setup or Windows utilities.
1152-Serial Port 2 Address	2S	Both external and internal	1.	Remove any Comm port
Conflict Detected		serial ports are assigned to		expansion cards.
		COM2.	2.	Clear CMOS.
			3.	Reconfigure card resources
				and/or run Computer Setup
				(F10 Setup).Run Computer
				Setup or Windows utilities.
1155- Serial Port Address	2S	Both external and internal	1.	Remove any Comm port
Conflict Detected		serial ports are assigned to		expansion cards.
		same IRQ.	2.	Clear CMOS.
			3.	Reconfigure card resources
				and/or run Computer Setup
				(F10 Setup).Run Computer
				Setup or Windows utilities.
1201-System Audio Address	2S	Device IRQ address conflicts	Reset the IRQ.
Conflict Detected		with another device.
1202-MIDI Port Address	2S	Device IRQ address conflicts	Reset the IRQ.
Conflict Detected		with another device.
1203-Game Port Address		Device IRQ address conflicts	Reset the IRQ.
Conflict Detected		with another device.
* L = Long, S = Short				continued

Deskpro Service Reference Guide D-5