HP ep9010 Picture menu (Continued)

Adjusting the projector

Picture menu (Continued)

Widescreen input	Sets whether a widescreen (16:9) input device is in use.
	Adjusts the height of the picture accordingly.
VGA settings...	Adjusts settings for a computer input.
Auto-sync	Resynchronizes the projector to the input signal. This
	can compensate for any change in the signal.
Frequency	Adjusts the timing of the projector relative to the
	computer.
Tracking	Adjusts the phase of the projector relative to the
	computer.
Vertical offset	Adjusts the picture up or down within the projection area.
Horizontal offset	Adjusts the picture left or right within the projection area.
Picture Mode	Adjusts color and picture settings to one of several
	combinations designed for different types of viewing
	situations. You can use a different picture mode for each
	source or each viewing environment. You can also
	customize each picture mode.
Customize picture	Changes settings associated with the current picture
mode...	mode.
Picture enhancement	Refines the color, lightness, and other characteristics of
	the picture.
Color temperature	Shifts colors toward red or blue.
Stretch	Selects how the picture fits on the screen:
	■ Best fit automatically fits the picture without stretching
	it.
	■ 1-to-1shows each picture dot as one projected dot.
	■ Reduced fits a standard-shape picture onto a
	widescreen projection screen.
Picture shift	Moves the picture within the projection area. This is
	useful if you are viewing a picture that is smaller than the
	full projection area, such as a widescreen movie.
Reset picture shift	Resets the picture shift to zero (centered).
Reset this picture	Restores the current picture mode to its default settings.
mode

48 User’s Guide