Troubleshooting

Problem

Possible Cause

Solution

 

 

 

Image is not

Position may need

Press the Menu button to

centered.

adjustment.

access the OSD Menu.

 

 

Select Image Control/

 

 

Horizontal Position or

 

 

Vertical Position to adjust

 

 

the horizontal or vertical

 

 

position of the image.

 

 

 

“No Connection,

Monitor video cable is

Connect the 15-pin monitor

Check Signal Cable”

disconnected.

video cable to the VGA

is displayed on

 

connector on the computer,

screen.

 

or connect the DVI-D signal

 

 

cable to the DVI connector

 

 

on the computer. Be sure

 

 

that the computer power is

 

 

off while connecting the

 

 

video cable.

“Out of Range. Set Monitor to 1280 x 1024 @ 60Hz” is displayed on screen.

Video resolution and/or refresh rate are set higher than what your monitor supports.

Restart your computer and enter Safe Mode. Change your settings to a supported setting (see the table “Factory Preset Display Modes” in Appendix B). Restart your computer so that the new settings take effect.

A–2

User’s Guide