Taking Snapshot / Emergency Recording
You can also use this device to take snapshots of the current scene. From the standby screen, press the 
button to take a snapshot. If recording is in progress, press the 
button to stop the recording first.
During Video Recording, press the OK button to enter emergency recording mode, the “Emergency” message will be shown immediately on the upper left corner of the screen, and the recorded file will be protected. If the Collision Detection function is enabled and a collision is detected, the device will automatically trigger the emergency recording feature.
Motion Detection
Enable/Disable the motion detection. If this function is enabled and the power off button is pressed, the system alert message, “Press OK Key to Power off, or enter motion detection after 10sec.”, will pop on the screen. Under motion detection mode, the device will automatically start recording when any object movement is detected.
The alert message of “Emergency files are full” will pop up on the screen when the emergency recording files are full, and the oldest emergency file will be automatically deleted when a new emergency recording file is created.
5