2.6.3 Setting the Universal Time Code (UTC)
Depending on your location, you may need to change the current UTC setting of the camcorder so that the correct date and time are updated when a GPS signal is detected.
1.If recording is in progress, press the 
button to stop recording.
2.Press the 
button to open the OSD menu.
3.Use the 
or 
buttons to navigate to the Satellite Synchronization option and press the OK button. Ensure that the On setting is selected and press the OK button again to view the UTC setting.
4.Refer to the UTC Map below and use the 
or 
button to select the desired setting and press the OK button to confirm the setting.
5.Press the 
button to exit the menu.
*Be sure to adjust for daylight saving time (DST) by adding +1 hour to the UTC offset** These areas may observe half hour increments and daylight saving time (DST)
17