Speed setting 
Lane deviation 
correction
illustration
4.Press the 
button to exit the menu.
Note:
The product shall be installed near the rearview mirror, at the center of windshield, so as to improve the accuracy of detection to judge the lane deviation.
3.1.3 Motion Detection
If Motion Detection is activated, when power off the camcorder, the system alert message, “Press OK Key to Power off, or enter motion detection after 10sec.”, will pop on the screen. This means the system will enter Motion Detection automatically in 10 seconds; when the camcorder detects any motion in front of lens, Video Record will be activated for a duration the same as the length setting.
To set the motion detection, do the following:
1.Press the 
button to enter the OSD menu.
2.Press the 
/
button to select Motion Detection and press the 
button.
3.Press the 
/
button to select On and press the 
button.
4.Press the 
button to exit the menu.
Note:
1.When the battery is fully charged and is in good condition, Motion Detection can record continuously for about 30 minutes.
2.As the camcorder is used, the battery storage capacity will decrease gradually. This is a normal phenomenon for the battery
3.The LCD will be off in 30 seconds after the Motion Detection function is enabled.
19