HP F520g 2.4 Powering the Camcorder On / Off, 2.5 Initial Settings, 2.4.1 Auto Power On/Off, 2.5.1 Setting the Universal Time Code (UTC)

2.4 Powering the Camcorder On / Off

2.4.1 Auto Power On/Off

Once the vehicle engine is started, the camcorder automatically turns on. If the AUTOMATIC RECORD function is enabled, the recording will automatically start right after the camcorder turns on.

2.5 Initial Settings

Before using the camcorder, we recommend you to enable the Automatic Record function and set up the correct date and time.

2.5.1 Setting the Universal Time Code (UTC)

Depending on your location, you may need to change the current UTC setting of the camcorder so that the correct date and time are updated when a GPS signal is detected.

*Be sure to adjust for daylight saving time (DST) by adding +1 hour to the UTC offset** These areas may observe half hour increments and daylight saving time (DST)

8