3.1.4 Motion Detection
If Motion Detection is activated, when the camcorder is powered on, a message “Wait for 10 seconds to enter Motion Detection or touch the screen to power off” will be displayed on the screen. This means the system will enter Motion Detection automatically in 10 seconds; when the camcorder detects any motion in front of lens, Video Record will be activated for a duration the same as the length setting.
To set the motion detection, do the following:
1.Touch 
to enter main menu.
2. Touch | to switch over to Driving Safety Main Menu. |
3.Touch 
/
to select 
for
entering Motion Detection menu,
touch 
again to activate (on).
4.Touch 
to return to record screen.
Note:
1.When the battery is fully charged and is in good condition, Motion Detection can record continuously for about 30 minutes.
2.As the device is used, the battery storage capacity will decrease gradually. This is a normal phenomenon for the battery.
21
