HP Firewall NAT log auditing, MPLS log auditing

NAT log auditing

Configuration guide

From the navigation tree of the firewall management component, select NAT Logs under Event Auditing to enter the NAT log auditing page, as shown in Figure 56. The page lists NAT logs of HP firewalls. Each log records the source IP:port and destination IP:port before and after network address translation, as well as the NAT session start time and end time.

Figure 56 NAT log auditing

MPLS log auditing

Configuration guide

From the navigation tree of the firewall management component, select MPLS Logs under Event Auditing to enter the MPLS log auditing page, as shown in Figure 57. This page lists MPLS logs in detail. Each log records such information as source IP address and source port, destination IP address and port, VPN ID, time, and byte count.

MPLS log auditing allows you to query MPLS logs by source IP, destination IP, source port, destination port, VPN ID, labels, start time, and end time, helping you know the information of MPLS logs.

55