Removal and Replacement Procedures

3.Make note of which antenna cable is attached to which antenna clip on the Mini Card module, and then disconnect the auxiliary and main antenna cables 1 from the Mini Card module.

4.Remove the two Phillips PM2.0×4.0 screws 2 that secure the Mini Card module to the computer.

5.Remove the Mini Card module by pulling the module away from the socket at an angle 3.

✎Mini Card modules are designed with a notch 4 to prevent incorrect installation into the Mini Card module socket.

Removing a Mini Card Module

Reverse the above procedure to install a Mini Card module.

5–16

Maintenance and Service Guide