Memory module

Description

Spare part number

 

 

1 GB, 1066 MHz DDR3

598859-001

 

 

2 GB, 1066 MHz DDR3

598856-0011

 

 

4 GB, 1066 MHz DDR3 (for models 1.1 and 1.2 only)

599092-0011

 

 

Before removing the memory module:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer.

4.Remove the battery (see Battery on page 46).

Remove the memory module:

1.Turn the computer upside down with the front toward you.

2.Loosen the three Phillips PM2.5×6.0 captive screws (1) that secure the mini-card compartment cover to the computer.

3.Lift the back side of the memory module cover (2)

4.Lift the cover off the computer (3). The mini-card compartment cover is included in the plastics kit, spare part number 595200-001.

NOTE: Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.

ENWW

Component replacement procedures 55