Enable/disable LAN power saving mode. Enable/disable SATA Native Mode. Enable/disable Dual Core CPU. Enable/disable HDD translation mode.

System Configuration menu

NOTE: Some of the listed System Configuration options might not be supported by the computer.

Select

To do this

 

 

Language

Change the Computer Setup language.

 

 

Boot options

● Set an f9, f10, and f12 delay when starting up.

 

● Enable/disable CD-ROM boot.

 

● Enable/disable floppy boot.

 

● Enable/disable internal network adapter boot.

 

● Enable/disable MultiBoot, which sets a boot order that

 

can include most boot devices in the system.

 

● Set the Express Boot Popup delay in seconds.

 

● Set the boot order.

 

◦

1st boot device—USB CD-ROM

 

◦

2nd boot device—USB floppy

 

◦

3rd boot device—USB SuperDisk

 

◦

4th boot device—Notebook hard drive

 

◦

5th boot device—USB hard disk

 

◦

6th boot device—Network controller

 

 

Device Configurations

● Swap the functions of the fn key and left ctrl key.

 

● Enable/disable USB legacy support. When enabled,

 

USB legacy support allows the following:

 

◦

Use of a USB keyboard in Computer Setup even

 

 

when the operating system is not running.

 

◦

Startup from bootable USB devices, including a

 

 

hard drive, diskette drive, or optical drive

 

 

connected by a USB port to the computer.

● Enable/disable BIOS DMA data transfers.

● Enable/disable fan always on while connected to an AC outlet.

● Enable/disable data execution prevention.

●

●

●

●

98 Chapter 5 Setup Utility

ENWW