Speaker assembly
Description | Spare part number |
|
|
Speaker assembly (includes cable) | |
|
|
Before removing the speaker assembly, remove the following components:
1.Battery (see Battery on page 43)
2.Service access cover (see Service access cover on page 44)
3.Hard drive (see Hard drive on page 45)
4.Optical drive (see Optical drive on page 47)
5.Keyboard (see Keyboard on page 52)
6.TouchPad top cover (see Top cover on page 55)
7.TouchPad LED board (see TouchPad LED board on page 60) Remove the speaker assembly:
1.Disconnect the speaker cable (1) from the system board.
2.Gently pry back the tabs on the base enclosure (2) to release the speakers, and then lift up to remove the speakers (3).
Reverse this procedure to install the speaker assembly.
Component replacement procedures 61