Power connector
Description | Spare part number |
|
|
Power connector | |
|
|
Before removing the power connector cable, remove the following components:
1.Battery (see Battery on page 43)
2.Service access cover (see Service access cover on page 44)
3.Hard drive (see Hard drive on page 45)
4.Optical drive (see Optical drive on page 47)
5.Keyboard (see Keyboard on page 52)
6.Top cover (see Top cover on page 55)
Remove the power connector:
1.Position the computer
2.Disconnect the power connector cable (1) from the system board.
3.Lift the power connector (2) away from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
Component replacement procedures 63