registering the wireless gateway

Make sure you register your product with HP after the installation process is complete. The registration option has been pre-selected for you. HP registration provides you with automatic notification of updates to the firmware installed on the Gateway and to the software installed on the PC.

If you choose to register your product at a later date, enter the following into the address window of your Web browser (such as Internet Explorer or Netscape): http://register.hp.com

Then press Enter.

6

converting from an Ethernet to a wireless connection

If, after installing the Wireless Gateway and the first computer, you wish to change the first computer to a wireless connection (instead of Ethernet), follow these steps:

1Disconnect the Ethernet cable between the first computer and the Wireless Gateway.

2Complete the steps for “installing additional network computers” described in the following section.

Filename: QS Wireless GW.doc

Title: HP-Print2k.dot

Template: HP Quick Start.dot

Author: Rob Heiret

Last Saved By: Elizabeth Stoneburg

Revision #: 31

Page: 6 of 12

Printed: 08/14/01 04:23 PM