HP hn200w manual Select PPPoE as the login method

setup

❑Login PPPoE: Check with your ISP to determine whether Point-to-Point Protocol over Ethernet (PPPoE) should be enabled. If PPPoE should be enabled:

1 Select PPPoE as the login method.

2 Enter the User Name and the Password as specified by your ISP.

3 Select one of the following:

❑Connect on Demand to connect/disconnect the PPPoE connection automatically.

The PPPoE connection will be disconnected if it has been idle longer than the Max Idle Time setting (recommended settings are 0 or 9999 for best connection reliability). If you have been disconnected due to inactivity, Connect on Demand enables your Gateway to automatically reestablish your connection as soon as you attempt to access the Internet again.

❑Keep Alive to keep the Internet connection alive indefinitely.

The gateway keeps the Internet connection alive indefinitely by sending out a few data packets periodically so your Internet service detects that the connection is still active. If you enable PPPoE, remember to remove any existing PPPoE applications already on any of your PCs. (Disregard RAS Plan which is for RAS only.)

If PPPoE should not be enabled: Select Disable.

❑Login RAS (Singapore only): SingTel Magix uses Alcatel Remote Access Service (RAS) as the main authentication method for its Asymmetric Digital Subscriber Line (ADSL) servers in Singapore. This method uses TCP port 5555. To enable RAS:

1 Select RAS as the login method, then enter your user name.

Note: A 512K user should use one of the following formats: username or username@INT512.

2Enter your password and select your RAS Plan.

3To check your RAS status select the Status tab. (Disregard Connect on Demand and Keep Alive, which are for the PPPoE option only.)

Click Apply to save settings.

55